TerraformerX Posted February 3, 2016 Share Posted February 3, 2016 I was playing around with a few models, and I discovered that I couldn't (or didn't know how to) make a box the same width as a ventgrate. I did decrease the grid and I snapped both the vent and block to the same line, so those faces line up perfectly in a straight line. The far opposite faces of the vent and box don't line up exactly perfect. See the "back" viewport in the picture. Is there an easy way to have an object snap or align to the edge of an adjacent object? That would be very nice and intuitive. But if there isn't a way to do that, how would you solve this problem? I tried everything I could think of. I even tried scaling it larger along that axis, but it increased the size in both directions, not just one. I could keep decreasing the size of the grid, but I thought there has to be an easier way. I'm sure there's a way to solve this. I just don't know it Thanks Quote Link to comment Share on other sites More sharing options...
Brutile Posted February 3, 2016 Share Posted February 3, 2016 I don't think there is any kind of snap feature, but in your case, I would recommend editing the model so that it fits nicely in the grid. Quote Link to comment Share on other sites More sharing options...
onaid Posted February 3, 2016 Share Posted February 3, 2016 not sure if this helps i had similar problems , snap to grid as long as edge of your object is lined up with grid your other object should snap to same grid space, other option is to turn this off and you can move objects without snapping if they are off a grid line, if that makes sense Quote Link to comment Share on other sites More sharing options...
Roland Posted February 3, 2016 Share Posted February 3, 2016 Snapping is one thing I have requested at several occasions during the year's. It never seems to come true though. I don't know if it's hard to implement or if it's considered unimportant, but it would surely be appreciated if it came true after year's of requests ☺ Quote Roland Strålberg Website: https://rstralberg.com Link to comment Share on other sites More sharing options...
TerraformerX Posted February 3, 2016 Author Share Posted February 3, 2016 not sure if this helps i had similar problems , snap to grid as long as edge of your object is lined up with grid your other object should snap to same grid space, other option is to turn this off and you can move objects without snapping if they are off a grid line, if that makes sense Thanks. This works good enough for me. Just like in AutoCAD, when I zoom in far enough, I can see that they're not perfectly lined up, even when they're snapped to the grid, but no one's going to notice. I do have a new question, though. How do you have all those buttons on your toolbar? I have the same version of Leadwerks you do, 4.0. I made my window small so it would be a smaller picture when I took the screenshot, but the buttons on my toolbar are all I have. I even have the professional version installed, according to the Steam that I launch Leadwerks from. Is my version not running the professional version? Quote Link to comment Share on other sites More sharing options...
onaid Posted February 4, 2016 Share Posted February 4, 2016 no worries mate attached snip of my build version, also do you have toolbar selected in view tab ? see attached . are you running Linux ? Quote Link to comment Share on other sites More sharing options...
onaid Posted February 4, 2016 Share Posted February 4, 2016 here are two rectangles snapped together, you should be able to get them lined up perfectly they are on the same grid line. Quote Link to comment Share on other sites More sharing options...
onaid Posted February 4, 2016 Share Posted February 4, 2016 here are two rectangles lined up together off the grid line , (turn off grid snap) Quote Link to comment Share on other sites More sharing options...
TerraformerX Posted February 5, 2016 Author Share Posted February 5, 2016 Thanks onaid, turning off grid snap helped. However, I don't have any options under View above Scrollbars. My view menu is the same as yours, except I don't have your first two options. Mine starts at scrollbars. Yes, I have Linux Mint MATE Maya. 32-bit. EVGA GeForce GT 730 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.